Press the reset button and you are back in action!
J TECH PHOTONICS INC DRIVER
Well, don’t worry because the laser will be disabled whenever the power to the driver is lost. You were running your program and then everything is dark… Power doesn’t come back on for awhile… long enough for you to forget that the laser was left ON! You come back and are checking your laser and boom, the power is back on, right when you are looking straight at it.
Consider your power goes out in your area where the laser is located. Power Fault Protection – This one may seem like it is not needed, but hear us out.Also provides for the addition of an E Stop button for the laser, which is always good for if you need to stop the laser super quick! Add as many switches as you want to make a super safe area for your laser machine so nobody can accidentally look into the laser. Remote Interlocks – This feature allows for addition of switches to your enclosure so when it is open, the laser will automatically turn off.This feature is good if you have curious children or have your laser in a shared area and want to limit use. You can only remove the key when it is disabled. When the key switch is turned on, the laser is enabled and the key CANNOT come out. Key Switch – This key is needed to enable the laser.They might seem trivial, but they could save your eyesight! Here is a run down of the new safety feature s to protect yourself and others: But NOW we have more safety in mind as well! The US Federal Government has a list of things that are required for operating these high power class 4 lasers. We still have all of the features that make this laser kit awesome – precision laser trimmed regulators for constant current to the laser, 0.01 tuning resolution, digital isolation, soft start, esd protection, current limiting, and the list goes on. Works with popular machine like Lead 1010, WorkBee, and C-Beam. The laser cables support up to a 40″ x 40″ machine size. This kit works with the standard openbuilds spindle mount sold in their machine kits. DescriptionĪll the choices to add a laser to your Openbuilds CNC in one place.
J TECH PHOTONICS INC SOFTWARE
Makerparts is independently owned and operated from Openbuilds and they may change hardware and software at any time making these instructions invalid. Unleashing the potential of our students & faculty in Orlando, Florida, UCF is one of Americas best colleges for academics, research, impact & value. The use of these instructions to make a laser cutter is under your own discretion and all safety precautions should be followed. This is a project and Makerparts is not responsible or liable for any and all damage or injury caused to people or property. Use proper safety eyewear to prevent injury to eyes. Instructions for Connection on OpenBuilds Machines are Here: Disclaimer: The laser used in this project is very powerful and all safety precautions must be taken.
J TECH PHOTONICS INC PRO
We took two 7W PRO diodes and combined them into one laser.
0 kommentar(er)
